Pump Line
Pipe and Fittings
Pipe Documents
|
WHEELMOVE SPECIFICATIONS
- Pipe - LAKE alum 5"x40'x.078 3004-H26 aluminum pipe
seam welded.
- Pipe - LAKE alum 4"x40'x.072 3004-H26 aluminum pipe
seam welded.
- Flange adapter: CROWN AM 8 hole flange x press with
pre packaged CROWN AM nut, bolt & flange gasket assembly.
- Wm wheel: CROWN AM 18 ga wheel, single or double
cleat, 4" or 5" CROWN AM precision 9-hole split hub
58" dia, 64" dia, or 76" dia.
- Mover: CROWN AM CROP KING Mover, Briggs & Stratton
8 hp vertical shaft engine, one piece cover with no
openings, low profile for visibility both directions,
pre-assembled power pack. 12 ft single frame with drain
for maintenance & cleaning capabilities. CROWN AM mover
hydraulic locking control valve capabilities.
- Mover: CROWN AM HARVEST KING mover, Briggs & Stratton
8 hp horizontal shaft engine. One piece cover with openings
for control valve & engine starting. 12 ft frame with
drain for maintenance & cleaning capabilities. CROWN
AM mover hydraulic locking control valve capabilities.
- Mover: CROWN AM DUAL KING mover, Briggs & Stratton
8 hp vertical shaft engine. Low profile one piece cover,
epoxy coated remote oil tank with drain for ease cleaning.
Pre-assembled power pack. 15 ft twin rail design. CROWN
AM mover hydraulic locking control valve capabilities.
- Couplers: CROWN AM TORQUE COUPLER ASSEMBLY. CROWN
AM interlocking 89 gear tooth high quality die cast
aluminum with single CROWN AM flapper drain assembly
or CROWN AM double mushroom drain assembly with CROWN
LOCK torque coupler clamp and CROWN AM QUAD gasket.
- Hose set: CROWN AM 4" black rubber discharge hose
with CROWN AM male latch x CROWN AM male latch hose
ends with CROWN AM slip band and latch. ( alum or steel)
- Flush plug: CROWN AM interlocking 89 gear tooth
one piece die cast body with CROWN AM splash guard.
Manual control with CROWN AM double drains, include
CROWN AM mushroom drain assembly.
- Press bands: CROWN AM MHB, 4" OR 5" 15 ga aluminum
bands.
- End feed adapter: CROWN AM interlocking 89 gear
tooth die cast alum torque coupler with CROWN AM 14
ga "R" or "RO" hose coupler. Includes 4" CROWN AM torque
coupler QUAD gasket and CROWN AM 4" CHEVRON gasket.
- Press on hose end feed coupler : CROWN AM 14 ga
4" "R" or "RO" steel galv hose coupler x press with
CROWN AM CHEVRON gasket.
|
